Tanktronic® is an advanced electronic tank management system that monitors water levels and temperature. It can also manage and control tank filling. This user-friendly system, which is quick to install, offers a complete cost-effective solution to water monitoring.
The primary monitoring and control hardware for the Tanktronic system is the Control Unit, which can manage up to 4 x individual tank sensors, 8 x Tanktronic Servo Ceramic Valves and 2 x Tanktronic Control Valves plus additional third party devices. The unit can manage up to four individual tanks.
The unit operates on a 230V/50Hz single phase supply from a switched fused 3A supply. Tanktronic only requires a single power connection to the Control Unit, while the additional modules do not require a separate supply. The optional Battery Module can provide back-up power if required.
Tanktronic can control up to 4 x separate tanks. This can be up to 4 x single tanks, 2 x pair of balanced tanks, or 1 x pair of balanced tanks + 1 x single tank. Adding the S-Module will allow additional Control Valves and third party devices to be added.
A range of options allows Tanktronic to support any design of tank layout. The plug-in modules also give the system enhanced functionality and convenience as required by the user:
Sensor – The Sensor monitors both water pressure and temperature. The unit is provided pre-fitted to a connection box for rapid mounting and electrical wiring. Available as either a single or twin sensor unit with either 3m or 5m cable.
Repeater Unit – Works as an interface extension to the Control Unit, allowing the user to programme, monitor and control the Tanktronic system remotely from a building facilities management office location. The unit does not require a separate power supply and can be sited 100 metres away from the main Control Unit installed in the tank room.
S-Module – An expansion module that can boost the Tanktronic control capacity. Adding the S-Module will allow an additional 2 x Control Valves to be controlled and extra third party devices to be connected to the Tanktronic system.
Battery Module – Provides back-up power to the mains supply, providing up to two days of normal operation before power is expended. A recommended option if the building application is particularly dependent on the Holiday Schedule function.
Tanktronic Servo Ceramic Valve (SCV) – This compact and intelligent valve is optimised for Tanktronic system applications and provides efficient motorised tank filling. Models are available for pipe sizes ranging from ¾” to 2”.
Tanktronic Control Valve – The Control Valve works with Tanktronic to provide tank filling. This in-line valve is supplied with a flanged fitting suitable for pipe sizes ranging from 2” to 6”.
In addition to the standard Sensor input, the Control Unit features 2 x additional input connection ports. These volt-free contacts permit the fitting of third party devices such as leak detection or an emergency override button.
The Control Unit features 4 x volt-free contact output ports. Two are dedicated to Control Valve operation, while two outputs can be used for a variety of third party devices, including:
- Additional filling valves
- Low level alarm
- Secondary shut-off valve
- Immersion heater
- Low level pump cut-out
Skip to content
